ZELLAMID® 350 XF
Bio-Based Engineering Plastic
ZELLAMID® 350 XF
With the market launch of the new bio-based Co-Polymer ZELLAMID® 350 XF Zell-Metall underlines
its innovation power and its commitment to sustainability.
EXCLUSIVE
ZELLAMID® 350 XF is a complete new and partly bio-based Co-Polymer, which is available as
semi-finished product only at Zell-Metall Engineering Plastics worldwide.
TOP PERFORMANCE
ZELLAMID® 350 XF has „Polyamide-like“ properties and convinces through very good elasticity.
This Co-Polymer has a very high viscosity and keeps its high impact resistance even at low temperatures
under dry conditions. The product is soft without additional conditioning and takes up water 50 % less
than Polyamide 6.
THE VERSATILE GREEN ALTERNATIVE
With its properties, ZELLAMID® 350 XF convinces as commercially and technically interesting biobased
alternative to PA 12 in applications with high requirements on impact resistance. First experiences are
made in several applications like slightly loaded wheels, castors and vibration damper. Advantages are also
seen in food industry, where gases are released like for cheese molds or molds of patties.
For further information regarding standard or special dimensions, please download our catalogue
or contact
your ZELLAMID® sales expert.
Rods
| Diameter | Standard Length |
| mm | mm |
| 30 – 150 | 3.000 |
Sheets
| Thickness | Width | Length |
| mm | mm | mm |
| 10 - 40 | 1.000 | 2.000 |
Tubes
| Outer diameter | Inner diameter | Length |
| mm | mm | mm |
| 150 | 100 | 3.000 |
For further information regarding standard or special dimensions, please download our catalogue or contact your ZELLAMID® sales expert.
